All guides
P1571
Difficulty: ModerateTime: 1-2 hoursUpdated: March 10, 2025

Understanding the P1571 Code

The P1571 diagnostic trouble code indicates a Brake switch out of range in your 2021 Range Rover Evoque. This code is specific to Land Rover vehicles equipped with advanced engine management and transmission systems. When the powertrain control module detects a fault in this circuit, it illuminates the check engine light and stores the failure in memory for technician diagnosis.

The Range Rover Evoque utilizes sophisticated electronic control systems that interface through multiple communication networks. The Engine Control Module (ECM) monitors various sensors and actuators throughout the powertrain to ensure optimal performance, fuel efficiency, and emissions control. When the P1571 code is triggered, the PCM has detected a condition that exceeds acceptable parameters and requires immediate attention.

Land Rover's commitment to off-road capability and luxury performance means these vehicles feature complex systems that work together seamlessly. The Terrain Response system, air suspension, and advanced transmission all communicate through the CAN bus network to provide the driver with unparalleled control in any environment.

Common Causes of P1571

Several factors can trigger the P1571 trouble code in your 2021 Range Rover Evoque:

Electrical Issues:

  • Damaged or corroded wiring harnesses, especially in off-road conditions
  • Failed connectors with poor terminal contact
  • Blown fuses or fusible links in the affected circuit
  • Short or open circuits in the wiring
  • Water intrusion into electrical connectors
  • Aftermarket accessories interfering with factory systems

Component Failures:

  • Failed sensors specific to the affected circuit
  • Malfunctioning control modules
  • Defective actuators or motors
  • Compromised electrical grounds
  • Failed solenoids or valves
  • Wheel speed sensor failures (common on models with Terrain Response)

System-Specific Issues:

  • Air suspension compressor failures in models equipped with self-leveling
  • ZF 8HP transmission mechatronics issues
  • Ingenium diesel engine particulate filter problems
  • AJ126/AJ133 V6/V8 engine ignition coil failures
  • Terrain Response solenoid valve malfunctions

Diagnostic Procedure for P1571

Step 1: Retrieve Codes and Freeze Frame Data

Connect your Land Rover-approved diagnostic scan tool to the OBD-II port and retrieve all stored codes. Document the freeze frame data associated with the P1571 failure. This information reveals the operating conditions when the fault occurred, including engine temperature, vehicle speed, RPM, and load percentage. Many independent shops use advanced scan tools that can access Land Rover-specific modules beyond standard OBD-II codes.

Step 2: Visual Inspection

Perform a thorough visual inspection of all wiring and connectors related to the affected system. On Range Rover Evoque vehicles, pay special attention to:

  • Engine bay wiring that may have been damaged by heat or oil leaks
  • Connections near the transmission (especially on models with ZF 8HP)
  • Ground straps and their attachment points
  • Fuel pump and sender unit connections in the fuel tank
  • Air suspension electrical connections at each corner

Step 3: System-Specific Testing

Depending on the specific P1571 code, perform appropriate testing:

For sensor-related codes, use a multimeter or oscilloscope to verify proper operation. Many Land Rover sensors can be tested using published specifications in the workshop manual. Check both reference voltage and signal return circuits.

For communication-related codes (U-codes), use a CAN bus diagnostic tool to verify bus integrity, termination resistance, and communication timing.

Step 4: Module Programming and Updates

If a control module is suspected, verify that it has the latest software calibration. Land Rover releases periodic updates that address known issues. Module replacement requires programming using SDD (System Diagnostic Software) or equivalent tooling.

Range Rover Evoque-Specific Considerations

The 2021 Range Rover Evoque features unique characteristics that affect diagnosis and repair:

Terrain Response System: This innovative system allows the driver to select from various terrain modes (grass, gravel, mud, sand, rock crawl). When P1571 relates to this system, check the solenoid valves that control cross-linked braking and traction aids.

Air Suspension: If your Range Rover Evoque is equipped with air suspension, the system maintains ride height regardless of load. The compressor, valves, and height sensors all communicate through the CAN bus. Code P1571 may relate to ride height inconsistency or compressor failure.

ZF 8HP Transmission: Many Range Rover Evoque models use this renowned 8-speed automatic transmission. Mechatronics failures are common causes of transmission-related codes. The mechatronics unit houses the valve body, shift solenoids, and transmission fluid pressure sensors.

Ingenium Diesel Engines: If your Range Rover Evoque has the Ingenium diesel engine, pay attention to the DPF (Diesel Particulate Filter) system, which can trigger multiple codes related to regeneration and pressure sensing.

Repair and Replacement

Once diagnosis is complete, repairs may include:

  • Wiring harness repair or replacement
  • Sensor replacement (MAF, VSS, crankshaft position, camshaft position)
  • Solenoid or valve replacement
  • Control module replacement and programming
  • Transmission mechatronics overhaul
  • Ground strap repair or replacement

Prevention and Maintenance

To minimize the risk of P1571 codes in your Range Rover Evoque:

  • Follow the recommended service intervals for your 2021 Range Rover Evoque
  • Use genuine Land Rover parts for replacements
  • Keep electrical connectors clean and protected
  • Address check engine lights promptly before they escalate
  • Have the vehicle inspected by qualified Land Rover technicians

Conclusion

The P1571 code in your 2021 Range Rover Evoque requires prompt attention to prevent drivability issues or component damage. While some causes are straightforward, many require advanced diagnostics and specialized tooling. When in doubt, consult with a qualified Land Rover technician who has access to the proper diagnostic equipment and technical information specific to your vehicle.

Remember that proper diagnosis is the key to successful repair. Rushing to replace parts without thorough testing often leads to unnecessary expense and continued problems. Take the time to follow the diagnostic procedure systematically, and you will arrive at the correct solution for your Range Rover Evoque.