All guides
P0473
Difficulty: AdvancedTime: 2-4 hoursUpdated: February 22, 2025

Common Symptoms

When your 2018 Hyundai Sonata triggers a Exhaust Pressure Sensor High code, you may experience:

  • Check Engine Light illuminated
  • Excessive exhaust smoke
  • Reduced engine performance
  • DPF warning light on (diesel models)
  • Turbocharger issues
  • Exhaust smell
  • Engine derate or limp mode
  • Engine stalling at idle
  • Excessive exhaust odors

The Check Engine Light will typically illuminate when this fault is detected. In some cases, you may notice driveability issues that worsen over time if the problem is not addressed.

Understanding the Exhaust Pressure Sensor High Code

The Hyundai Sonata 2018 is equipped with an advanced emission control system designed to minimize harmful exhaust emissions. When this system detects a malfunction in the Exhaust pressure sensor input above expected range. The Powertrain Control Module (PCM) monitors various sensors and actuators to ensure the emission control systems are operating within specification.

What Triggers This Code?

The Exhaust Pressure Sensor High code is set when:

  • The PCM detects an out-of-range condition from one or more emission-related sensors
  • The emission control system fails to achieve expected performance
  • A mechanical failure occurs in the EGR, EVAP, or catalyst system
  • An electrical fault is detected in the related circuit

Which Components Are Involved?

Hyundai vehicles use a sophisticated network of sensors and actuators for emission control:

  • EGR valve and position sensor
  • Oxygen sensors (upstream and downstream)
  • Catalytic converter
  • EVAP purge and vent solenoids
  • Various temperature and pressure sensors
  • PCM-controlled actuators

Diagnostic Procedures

  1. Visual Inspection: Inspect all exhaust pressure sensor lines for leaks, cracks, or blockages. Check the differential pressure tube for carbon buildup or damage. Inspect wiring to the sensor.

  2. Exhaust Backpressure Measurement: Using a scan tool, monitor exhaust pressure sensor readings during various engine operating conditions. Compare to specifications for your vehicle.

  3. Sensor Testing: Test the exhaust pressure sensor resistance and voltage output. Many sensors are combination temperature/pressure sensors. Verify both functions are operating correctly.

  4. Turbocharger Inspection (if equipped): Inspect the turbocharger for proper operation, oil supply, and wastegate function. Excessive exhaust backpressure often indicates turbocharger issues.

  5. DPF Inspection (diesel models): Inspect the diesel particulate filter for excessive soot buildup. A clogged DPF will cause elevated exhaust backpressure and trigger this code.

  6. EGR System Interaction: Many exhaust pressure sensors work in conjunction with EGR systems. Test the EGR valve operation to ensure it is not causing excessive backpressure issues.

Repair Strategies

Preliminary Repairs

Before addressing the Exhaust Pressure Sensor High code directly, repair any underlying issues that may have caused this fault. A systematic approach prevents repeat failures and ensures the root cause is addressed.

Component-Specific Repairs

EGR Valve Replacement Procedure:

  1. Disconnect the negative battery terminal for safety
  2. Locate the EGR valve (typically on the intake manifold or near the firewall)
  3. Remove any components blocking access to the EGR valve
  4. Disconnect the electrical connector and any coolant/vacuum lines
  5. Remove the EGR valve mounting bolts in a crossing pattern
  6. Compare the old EGR valve to the new replacement to ensure compatibility
  7. Install new EGR valve with a new gasket (always replace gaskets)
  8. Torque mounting bolts to 16-20 ft-lbs (22-27 Nm)
  9. Reconnect all lines and electrical connector
  10. Clear fault codes and perform road test

Sensor Replacement Tips:

When replacing sensors related to this code:

  • Always disconnect battery before electrical work
  • Apply anti-seize compound to sensor threads (unless specified otherwise)
  • Torque sensors to 7-10 ft-lbs (10-14 Nm)
  • Use new O-rings and seals throughout

Catalytic Converter Replacement:

If the catalytic converter is confirmed faulty:

  1. Allow exhaust to cool completely before work
  2. Support the exhaust system properly during removal
  3. Use proper catalytic converter tools if required
  4. Install new converter with new gaskets and hardware
  5. Torque exhaust nuts to 22-28 ft-lbs (30-38 Nm)
  6. Ensure proper alignment to prevent stress on flanges

PCM Reprogramming

Some vehicles require PCM reprogramming after EGR system repairs. Check with your dealer or a qualified technician for any available software updates. The PCM may need to learn new EGR position sensor parameters after replacement.

Post-Repair Verification

After completing repairs:

  1. Clear all diagnostic trouble codes
  2. Perform a thorough test drive under varied conditions
  3. Monitor the affected parameter with a scan tool
  4. Verify the Check Engine Light remains off
  5. If available, use an emissions sniffer to verify proper operation

Prevention

Maintenance Schedule

Regular maintenance prevents many EGR and emission-related faults. Follow your Hyundai Sonata 2018 maintenance schedule to minimize the risk of these issues.

Recommended Service Intervals:

  • EGR system inspection every 50,000-60,000 miles
  • Oxygen sensor replacement at 80,000-100,000 miles
  • Catalytic converter inspection at 100,000+ miles
  • EVAP system check during major service intervals
  • Replace spark plugs at manufacturer-specified intervals

Driving Habits

Your driving patterns significantly impact emission system health:

Helpful Habits:

  • Take longer highway trips regularly (helps clean catalytic converter)
  • Allow engine to reach operating temperature before heavy loads
  • Use high-quality fuel from reputable stations
  • Avoid prolonged idling when possible

Habits to Avoid:

  • Frequent short trips without full warm-up
  • Using low-quality or contaminated fuel
  • Ignoring check engine lights
  • Delaying oil changes (oil consumption affects emissions)

Quality Parts

When replacement is necessary:

  • Use OEM or quality aftermarket Hyundai parts
  • Avoid cheap replacement parts that fail quickly
  • Ensure proper part numbers for your specific Sonata 2018
  • Verify warranties on emission components

Early Warning Signs

Address these symptoms immediately before they cause fault codes:

  • Any persistent check engine light
  • Rough running or decreased performance
  • Fuel economy changes
  • Exhaust odors or visible smoke
  • Difficulty starting

Climate Considerations

Emission systems work harder in extreme temperatures. In very cold or very hot climates:

  • Allow extra warm-up time in winter
  • Watch for EGR issues in extreme heat
  • Consider more frequent inspection intervals

Parts Recommendations

Recommended Replacement Parts

When replacing components for this code, use quality parts from reputable manufacturers:

  1. Hyundai OEM EGR valve
  2. Denso EGR valve
  3. Hyundai OEM oxygen sensors
  4. Denso oxygen sensors
  5. Hyundai OEM gaskets

Parts to Avoid

  • Counterfeit or knockoff emission components
  • Parts without proper EPA certification
  • Used or rebuilt critical emission parts
  • Cheap plastic sensors that fail quickly

Genuine vs Aftermarket

For your specific vehicle, OEM Hyundai parts offer the best fit and reliability for emission system components. Quality aftermarket brands like Denso, Bosch, and AC Delco are acceptable alternatives when OEM pricing is prohibitive. Always verify part compatibility with your exact VIN before purchasing.

Related Components to Inspect

When addressing this code, also inspect:

  • All vacuum lines and connections
  • Electrical connectors for corrosion or damage
  • Ground straps and connections
  • Related fuses and relays

Professional Diagnosis

If you are not comfortable performing these diagnostics yourself, or if the problem persists after your repairs, consult a qualified mechanic or Hyundai dealership. They have access to factory diagnostic equipment and technical service information specific to your vehicle.

Cost Considerations

Repair costs vary significantly based on the root cause:

  • EGR valve replacement: $150-$500 (parts and labor)
  • Oxygen sensor replacement: $100-$300 per sensor
  • Catalytic converter replacement: $500-$2,500 depending on application
  • EVAP system repairs: $100-$400 depending on components

Always obtain multiple estimates and verify the shop's experience with Hyundai vehicles before authorizing repairs.